Solar Driveway Alarm System Wireless Outdoor Motion 2x Sensors 1000ft Long Range

Description

Wireless Driveway Alarm with Solar LED Lights - Built-in PIR motion detection sensors can detect movement up to 20ft away. Great for driveways, porches, gardens, and much more. Be alerted when a visit or family member enters your property, and protect yourself from trespassers.
High Efficiency Solar Panels - These panels convert sunlight into electricity to recharge the sensor light. When sensing motion (and if the surrounding environment is dark or at night), the powerful LED lights will switch on for 20 seconds. Upon receiving and using for the first time, give each light 6-8 hours of sun to fully charge it.
Reliable, Real-Life Range - 1000ft transmission range between each solar light and receiver. New technologies and manufacturing techniques ensure this 1000ft range no matter if trees, walls or other obstacles are in the way. Each solar light has a 20ft movement detection range, with an improved infrared detection chip smart enough to avoid false positives from passing cars, small animals, and even leaves in the wind.
Fully Expandable & Easy to Install - Create up to 4 unique detection zones, each with 1-4 solar lights (for a max of 16 possible lights) to fully protect your property. Each solar light has a PIR sensor with a 120° and 20ft detection range, and the receiver will play an audio alert when a light’s PIR sensor is tripped. The 1st zone alarm can be customized from among 36 included melodies.
Excellent Quality & Reliable Service - IP67 waterproof and heatproof for outdoor durability even in extreme weather conditions. We provide friendly and fast tech support to assist you both during and after your purchase. Package Includes: 1 x Receiver, 1 x Solar LED Light, 1 x Installation Base, 1 x Plastic Ground Stake, 4 x Wall Plugs, 4 x Screws, 1 x Instruction Manual.
Warm Tips:
1. Please fully charger the light before the first time using it. It takes about 6-8 hours to fully charge. Turn on solar light after it is fully charged.
2. In order to maximize the lighting effect, please make sure that the solar light is full of sunlight electricity.
3. Whether the solar light can produce the best lighting effect or not depends on sunlight intensity, geographical location, weather, season, and other factors.
4. It is normal that solar lights outdoors may need more time (at least 6-8 hours) to charge on cold or cloudy weather days because there is a lack of direct sunlight.
EXPANDABLE + CUSTOMIZABLE
✔ Detects motion in up to 4 different zones, and up to 4 sensors per zone.
✔ Cover your property by placing additional sensors to detect motion in different areas
✔ Set includes one sensor/one receiver. Expandable up to 16 sensors and unlimited receivers for complete coverage of your property.
✔ Never miss an alert by adding extra receivers throughout your home, garage, etc.
IP67 Waterproof Outdoor Solar Powered Wall Lights with Motion Sensor
Higher Photoelectric Conversion Efficiency with Mono-crystalline Silicon Solar Panel
Bigger Solar Panel
Advanced IP67 Waterproof Technology
High-impact ABS Plastic
High Performance Monocrystalline Silicon
2 in 1 Function & 2 Installation Options
How the Solar Landscape Light Works?
1. During the daytime, the solar panel converts sunlight into electricity and recharges the internal batteries.
2. When the brightness of the surrounding environment is low enough to require illumination, 1 BY ONE solar landscaping lights will automatically switch from energy storage mode to lighting mode when motion detected.
3 Modes Available:
1. The solar LED light can function without the receiver when needed. For this case, don't pair the solar LED light with the alarm receiver.
2. When in the day, the solar LED light will not turn on when the PIR sensor on the solar LED light is triggered, but will send the wireless signal to the alarm receiver and alert you.
3. If you do not want to be disturbed, but need the solar LED light to function at night, we suggest setting the alarm receiver’s Alert Mode to “Flash” mode so no alert sound is played.
Upgrated PIR Motion Inductor
With an upgraded wide-angle motion detector head, compare with other lights, 1 BY ONE solar light can detect motion as far as 20feet (6m). The illumination lasts about 20s and prolongs every time automatically when detecting human movement during its illumination.
When the battery is insufficient, the solar light will turn to dim mode but not turn off directly. It will be bright after it is charged during the daytime.
LOUD & ADJUSTABLE VOLUME
When the PIR sensors are triggered, the alarm receiver can alert you with an auditory sound, a flashing zone LED indicator, or sound and flashing zone LED indicator together. These are referred to as Sound, Flash, and Sound +Flash modes.
The alarm melody for Zone 1 can be customized from 36 melodies, while melodies for Zone 2 dingdong melody, Zone 3 dripping melody, and Zone 4 alarm melody are fixed and cannot be changed.
EASY TO INSTALL AND CONFIGURE
Power for Receiver:
The receiver can be powered by 3 x AA batteries or by a power adapter (output: DC 5.0V).
Power for PIR sensor:
The solar panel on the LED light absorbs sunlight and converts this sunlight into energy during the day and stores the energy in the built-in rechargeable battery to supply power for the LED light at night or in low brightness environments.
(BATTERIES AND ADAPTER NOT INCLUDED)